Professional manufacture paraffin wax warmer for salon beauty wax melting warmer for salon beauty marketing

Feature:

Using steps:

1. Put the machine into the flat desk;

2. Open the lid, put the paraffin wax into the machine, then close the lid;

3. connected to the power,push the bottom switch into 2.the light turn red, the machine start to work;

4. push the bottom switch into 1 to heat preservation when the paraffin wax is melted,before use the wax should be test the temperature,use it when the temperature is suitable;

5. cleaning the skin before the treatment;

6.Using the brush evenly daub on the paraffin wax to the sky skin;after the paraffin wax is drying, tear the wax lightly;

7.Using the special cleanser clean the residual wax in the machine after use

Features:

1.Paraffin Theray can beauty:hands,feet,face,body
2.Rapidly melting paraffin wax and having automatic constant temperate system.
3.Uses the high temperature resistant aluminum alloy material, service life is longer.
4.Comes with a heat insulation board for no worry about skin burns.
5.Ideal Switch:Simple design and more environmentally friendly,operation is simple.
"0" as the closed status,"1"as the open status(temparature has been debugged into the best temparature)
6..Suitable for both beauty salon use and personal home use.
7.Practical and portable design, easy to operate.


Using Steps:

1. Plugged in, put the paraffin in the instrument (whole or cut piece are both ok.
2. Turn on the switch, began to heat, about 90 minutes, the paraffin wax melting into liquid.
3. Wash your hands, ready to do hand wax(same step to do feet wax).
4. Put your hand into liquid wax for 5 seconds, repeated 5 times.
5. Hands have been covered wax, stay in the air for 30 seconds to be solid state.
6. Wear disposable gloves.
7. Wear cotton gloves (based on disposable gloves) for 30 minutes to let the hands fully absorbed.
8. Take off the gloves,the wax can continue to use after peeling from the disposable gloves.

Photo of products: