HongKong Beaufin Industry Limited
HongKong Beaufin Industry Limited
Product Details:
Payment & Shipping Terms:
|
| Type:: | Paraffina Wax Heater | Color:: | Pink / Purple |
|---|---|---|---|
| Voltage:: | 100-240v | Power:: | 220w |
| Port:: | Guangzhou | Sample:: | Available |
| Capacity:: | 3500ml | Packing:: | 6pcs/ctn |
| Packaging Details: | 75.5*42*37.8 Cm | Gw:: | 8.4 Kgs |
1: Place the machine on a flat surface and lift up the lid
2: Put the paraffin wax into the machine and put the lid back on
3: Connect the machine into the power and the screen shows “OFF”
4: Here are 2 modes for choice -
A: If you choose customized temperature mode, please just press “on/off” button then press “+”or ”-” buttons to set your desired
temperature.
(Temperature range is 35~75℃. The screen will show the spacific temperature after 5 seconds you set)
B: If you choose auto temperature mode, please press the “on/off” button for 3-5 seconds, when the screen shows “A-U”, the machine
will start working and the temperature cannot be controlled during this 80 minutes; After 80 minutes, the machine will keep at
55℃;
5: After the wax has melted, turn off the machine (Just press the “on/off” button for 3-5 seconds) and put the heat insulating
grid into the machine.
6: Check for suitable temperature before using the wax
7: Clean your skin completely before the treatment
8: Use the brush/silicone spatula to spread an even layer of wax onto your hands/the area you’re going to wax and wait for the wax
to dry
9: After the wax has dried, slowly dip your hands into the melted wax, with your fingers outstretched
10: Leave your hands in for 20-30 seconds
11: Relate steps 9 and 10 at least 4-5 times until it forms a thick layer on your skin
12: To help achieve a better effect, wrap your hands with the glove liner and put on a pair of heat-preservation cotton gloves
13: After 10-20 minutes, take off the gloves and get rid of the liner and remove the wax.
Tips:
1. You must feel the temperature of wax on the wrist before using.
2. Do not use on the injured skin.
3. Do not use on skin with whelk.
4. Do not pour the wax when it is melting, please cool the wax first, then turn on the power to melt the bottom of wax and pour the whole wax.
5. Please wait at least 1 minute before turn on again.
6.Do use the same voltage as marked on the warmer.
7.Please turn on again when the warmer is not work.
Elements Introduce:
Paraffin would make the skin velvet and soft, especially for the dry skin moisten, the effect in winter is salience. The method in use is easy, the products has a good reputation by beautician all over the world, either in domestic consumer. It is different from other treatment, your customer dip in the professional wax, the skin will become velvet and soft at once.
Photo of products:
